57 Integrated Stepper Motor Driver Module Controller

Motor Drives 57 integrated stepper motor driver module controller with cooling shell 485CAN pulse control mode Model: ZD-M57P Power supply mode: sort by color: ZD-M57P: conventional pulse control ZD-M57P-485: 485 communication protocol ZD-M57P-CAN: CAN communication protocol Number of Phases: Two Phases Continuous output current: 4.5A Maximum applicable motor capacity: 100W Input voltage: 24V Maximum output current: 4.5A Adapter motor: 57 stepper motor 2. Product parameters Power supply: DC11V-DC36V/5A, recommended DC24V Indexer interface COM: Common anode. DIP switch to select 3.3V-5V or 12V-24V Note: When the DIP switch HV selects the On position, COM can be used as a common cathode DIR: 0V or Vcom. Current: [email protected]/8mA@12V/15mA@5V/18mA@24V STP: 0V or Vcom. Current: [email protected]/8mA@12V/15mA@5V/18mA@24V Frequency 0-20KHz EN: 0V or Vcom. Current: [email protected]/8mA@12V/15mA@5V/18mA@24V Vcom or floating, EN enables stepper motor; 0V stepper motor is offline Output motor current: peak value 4.5A (single-phase maximum), 2-4.5A adjustable in actual use Drive mode: PWM chopper constant current Drive subdivision: DIP switch setting selection 1, 2, 4, 8, 16, 32, 64, 128 Insulation resistance: >100M at normal temperature and pressure Dielectric strength: 0.5KV under normal temperature and pressure, 1 minute Protection: input reverse connection, overload, drive overheat, drive overcurrent Operating temperature: -20-85 High-concerned chemical : none Material : Aluminum alloy Type : Other